how to configure HPLC-ICP-MS

Hellomtmail00 

You can configure HPLC from Tool Tab--> Settings--> Hardware--> Sample Instroduction

In Sample introduction you can select " Agilent 1200 LC", after this , auto config pop up appears to type the HPLC IP

Thanks

Regards

Hellomtmail00 

You can configure HPLC from Tool Tab--> Settings--> Hardware--> Sample Instroduction

In Sample introduction you can select " Agilent 1200 LC", after this , auto config pop up appears to type the HPLC IP

Thanks

Regards