I work with ICP-MS 7800. My tune report keeps failing. Does anyone knows how to resolve this issue?
Find maintenance, best practice, and troubleshooting articles.
I work with ICP-MS 7800. My tune report keeps failing. Does anyone knows how to resolve this issue?
Hi Kalpana welcome to the Agilent Community! I moved your question to the Atomic Spectroscopy forum for better visibility.
Best Regards,
Kristen
Are you running resolution/axis for the startup? M/z 205 is failing since the axis is outside the limits and the peak is too wide. I suggest running the startup optimization for the quadrupole.
From the 7:89:205 ratios, I would recommend checking the foreline pump as well. You can open performance reports in history view and compare IF/BK values with past values.