we have MP 4200 has Error : Magnetron anode current too high during igniting the plasma
Find maintenance, best practice, and troubleshooting articles.
we have MP 4200 has Error : Magnetron anode current too high during igniting the plasma
i have measured the Magnetron filament and found it 2.0 ohm NOT 0.3-0.4 !!! is this indicate that we have a problem with magnetron filament ??
good condition
melted anode
Please understand that only photos will be provided.
thanks a lot for your support
it seems that the magnetron anode looks in good condition
I have measured the Magnetron filament and found it 2.0 ohm NOT 0.3-0.4 !!! is this indicate that we have a problem with magnetron filament?!!!
and how to check the HVPS ?!!