Hi, I am new to ICP-MS, can you please explain to me what P/A factor stands for?
Find maintenance, best practice, and troubleshooting articles.
Hi, I am new to ICP-MS, can you please explain to me what P/A factor stands for?
A dedicated solution is required to readjust the P/A factor.
PA factor tuning solution set – p/n 5188-6524
• Multi-element custom mixes to provide suitable signal for detector cross- calibration 100 ml each:
• P/A Tuning-1 (in 2-5% HNO3) 20 ppm Zn, Be, Cd, As
10 ppm Ni, Pb, Mg
5 ppm Tl, Na, Al, U, Cu, Th, Ba, Co, Sr, V, Cr, Mn, Li(6), Sc, In, Lu, Bi
2.5 ppm Y, Yb
• P/A Tuning-2 (in 10% HCl and 1% HNO3 with trace HF)
10 ppm Mo, Sb, Sn, Ge, Ru, Pd
5 ppm Ti, Ir
Can you please give me the reference of composition for making PA Factor solution? How do you come up with above composition?
Can you please give me the reference of composition for making PA Factor solution? How do you come up with above composition?