Hi danielchsny , Yes power spikes from unscheduled power interruptions can cause damage to sensitive electronic circuits. Another contributing factor is that when power is lost to the LC/MS running under high vacuum the rough pump will stop, causing a…
Hi Carol_Ultivo , There is always a trade-off or balance to be struck between Scan speed, mass resolution and sensitivity in any quadrupole mass filter. So, if you decrease the resolution and keep scan speeds the same you will naturally get an increase…
Yes - it was a bit of a mess - but I was able to fix it. Thanks for the heads up. Not everything could be fixed in the computer portion of the method. I had to go into the GC configuration and fix it there.
Thank you!
Thank you for the suggestions. Yes, some of what I'm doing does not require the ISTD but I leave it in the analysis method b/c of needing it in some of the work. I haven't had a chance to work on this in a couple of weeks, but will definitely keep it…
Hello Adrsto ,
I apologize for the delayed repsonse.
It is not possible to use the NIST algorithm itself within Unknowns Analysis. As you mentioned, you can adjust the forward and reverse settings and enable the Adjust Score option, which from the…
Hello Lstephan ,
I apologize for the delayed response.
Errors of this type generally point to an issue with a preferences file. The first thing to try is clearing these using the Restore User Settings tool found in the Quant Tools group in the start…
Hello AJohnson13 ,
This is a known issue if Acquisition has been pinned to the Windows Taskbar and run from there in MassHunter Acq Version 11.x and later. This is due to the OpenLab integration and the need to launch through Control Panel to include…
This Information Applies To: Agilent 8890/8860 GC Systems
Issue
Early Maintenance Feedback is a useful feature on Agilent GC Systems and software that allows a user to monitor the maintenance needed on their GC. This feature allows for users to...
This Information Applies To: Agilent 8890/8860 GC Systems
Issue:
This procedure outlines the steps to view and clear the maintenance warnings on based on Agilent 8890/8860 GCs. You can also follow the onscreen instructions to perform maintenance...
This Information Applies To: Agilent 6000 Series LC/MS systems equipped with Agilent MS-40+ rotary vane pump.
Issue
Regular check of the rough pump fluid level in your MS40+ pump as part of regular 6000 LC/MS system maintenance checks.
Steps...
This Information Applies To the Following Products : All Agilent iFunnel and Agilent Jet Stream (AJS) 6400 Series LC/MS triple quadrupole systems, Agilent 6460A/C, 6470A, 6490A, and 6495A/B/C
Issue:
As LC Triple Quadrupole Mass Spectrometers (LC...