The Digest of upcoming webinars has been updated as of February 6.
Notable additions include:
LC & LCMS (3)
OMICS (1)
Check Out:
Part 3: The Mining Lifecycle and Elemental Analysis Workshop Series on February 13
Acceptability and Antioxidant…
Hello,
You cannot store anything but numeric values in variables and aggregators for IR. You could create your own public array in custom code or a dll where you can store and recall the values as needed. A customer wanted to be able to display in…
Mike,
It is possible in later versions, but I think in 2.5 that may not be available. If you do not see it in the list, then it was not added to that version. You can use CC to back calculate the values from the compound amount, concentration, multiplier…
It was on the equipment, you can check to be sure by running a performance check on the chiller. Our chiller passed all points on the performance check but failed on the ICP system.
Hi Ajgor,
I am trying to something very similar to what you were doing with your 6890. I have been having some issues getting a response from the machine (using a HyperTerminal PuTTY) and was wondering if you had any tips for troubleshooting this. …
Hey everyone,
I'm looking for some help regarding some communication issues we're experience on the QQQ 6470 after starting it up. Upon starting the QQQ up after a temporary shut down, we are now having troubles with initializing communication and unable…
Is the tutorial available for the " Cary WinUV (Pharma) software complements the Cary 60 UV-Vis spectrophotometer" software? Could we use the WinUV 5.3 Tutorial for the WinUV 5.1.3 software where the tutorial does not work for us because it's written…
Hello, Jorge! Have you ever try to change gain? Go to Gain Adjust e try to put close to 25000. If it still continue red, try to purge your IR with nitrogen gas. If you prefer to speak in pt-br send me a mensager.
This Information Applies To: Agilent GC Systems
Issue
A change in peak size can occur for single, multiple or all peaks.
Other chromatographic problems are identified in Basic Troubleshooting for GC Systems . Regular maintenance of your instrument...
This Information Applies To: Agilent GC Systems
Issue
Peak splitting is when a single compound is shown in the chromatogram as two peaks usually unresolved, or one of the peaks is a shoulder.
Other chromatographic problems are identified in Basic...
This Information Applies To: Agilent GC Systems
Issue
This test isolates the point of contamination to the sample introduction system, which includes the gas supply, gas supply lines, and the sample inlet. It does not include the syringe or autosampler...
This Information Applies To: Agilent GC systems
Issue
Peak tailing is present in a chromatography peak when it has an excessive asymmetry with a trailing edge. A normal peak is almost symmetrical.
Other chromatographic problems are identified...
T his Information Applies To: Agilent 8890/8860/7890/7820/6850/6890 GC Systems with TCD (Thermal Conductivity Detector)
Issue
Problems observed with thermal conductivity detector (TCD) results can have different underlying causes.
Resolution...
This Information Applies To: All GCs, 6890, 6850, 7890, 7820, 8890/8860, Intuvo 9000
Issue:
This article is a troubleshooting guide for when the Flame Ionization Detector (FID) does not ignite or the flame keeps going out.
Cause:
If the FID...
This Information Applies To: Agilent GC Systems with Flame Ionization Detector (FID)
Issue:
The Flame Ionization Detector (FID) jet could become clogged with ferrule material, column bleed, or heavy molecular analytes. The clogged jet will affect...
This Information Applies To: Agilent GC Systems with Split/Splitless (S/SL) inlet
Issue
Different liners are required for different high concentration, split analysis techniques including:
General use liners
Auto inject, general use
Auto...
This Information Applies To: Agilent GC Systems with Split/Splitless (S/SL) inlet
Issue
Different liners are required for different splitless trace analysis techniques including:
General use liners
Pressure, temperature, volume (PTV)
Hot...
This Information Applies To: Agilent 6890, 7890, 7820, 8890 and 8860 GC Systems with Split/Splitless (S/SL) inlet
Issue
Replacement of the Gold Seal is required as part of inlet maintenance. Replacement is required when the performance of the inlet...