Hi Marty,
Thanks for taking the time to respond. I saved the data to a file and then printed the file and it was properly formatted. I think that there is an issue with printing to paper from the method. Since this is a long unsupported CS revision…
Hi Abbey
Thanks for the info!
So far we have only been running this on various forms of olive oil. But the waves in the baseline remain regardless of MOAH contant. I have run samples that were analyzed by outside labs (with COA) that contain 0ppm…
From a quick google search, it appears that hydroquinone may be detectable through LC/MS (ESI) in both positive and negative mode. It forms a protonated molecule ([M+H]+) at m/z 111 in positive mode and two ions at m/z 108 and 109 in negative mode.
…
奔跑的小短腿 , While an LC/MS system may operate in both positive and negative ion polarity modes, it will switch between the two polarities based on the user input in the acquisition software. It is not possible to acquire in both polarities simultaneously…
Hi Vincenzo,
Thank you for your answer. We have the CFR environment. WinUV 5.1.3.1042. (1042 indicates Part11).
I’ve looked for method files for the following apps; Advanced Reads which are .MAB, Concentration .MCN, Scan .MSW, and Simple Reads .MSR…
Hello, you can export sequences into a new project file.
- Select a sequence of a loaded project and click Export data in the [project management] window.
- The now open window allows you to select more sequences from this project to export (see…
Depending on the software, linear and/or polynomial regression models are supported. Strictly speaking, linear fits can only be used for linear columns. However, it is also observed here that a polynomial fit may be more suitable depending on the column…
As you have already mentioned, HFIP is a very aggressive solvent that has a high density at a low boiling point.
Note that only the external degassers G1322/G7122 are compatible with HFIP. HFIP analyses are usually run with KTFAc as a salt additive…
This Information Applies To: Agilent GC Systems
Issue
Excessive baseline noise can be introduced at different points including sample preparation, sample introduction, separation, and the detector. The excessive background can cause reduced signal...
This Information Applies To: Agilent GC Systems
Issue
Baseline instability that is not reproducible across multiple runs can be introduced at different points including sample introduction, separation, and the detector. The baseline instability...
This Information Applies To: Agilent GC Systems
Issue
Peak fronting is present in a chromatography peak when it has an excessive asymmetry with a leading edge. A normal peak is almost symmetrical.
Other chromatographic problems are identified...
This Information Applies To: Agilent GC Systems
Issue
A shift in retention time can occur for single, multiple or all peaks.
Other chromatographic problems are identified in Basic Troubleshooting for GC Systems . Regular maintenance of your instrument...
This Information Applies To: Agilent GC Systems
Issue
A change in peak size can occur for single, multiple or all peaks.
Other chromatographic problems are identified in Basic Troubleshooting for GC Systems . Regular maintenance of your instrument...
This Information Applies To: Agilent GC Systems
Issue
Peak splitting is when a single compound is shown in the chromatogram as two peaks usually unresolved, or one of the peaks is a shoulder.
Other chromatographic problems are identified in Basic...
This Information Applies To: Agilent GC Systems
Issue
This test isolates the point of contamination to the sample introduction system, which includes the gas supply, gas supply lines, and the sample inlet. It does not include the syringe or autosampler...
This Information Applies To: Agilent GC systems
Issue
Peak tailing is present in a chromatography peak when it has an excessive asymmetry with a trailing edge. A normal peak is almost symmetrical.
Other chromatographic problems are identified...
T his Information Applies To: Agilent 8890/8860/7890/7820/6850/6890 GC Systems with TCD (Thermal Conductivity Detector)
Issue
Problems observed with thermal conductivity detector (TCD) results can have different underlying causes.
Resolution...
This Information Applies To: All GCs, 6890, 6850, 7890, 7820, 8890/8860, Intuvo 9000
Issue:
This article is a troubleshooting guide for when the Flame Ionization Detector (FID) does not ignite or the flame keeps going out.
Cause:
If the FID...