Hello Marty,
thanks for your reply. I tested your hint. It worked and I'm confident to code the formula in the CC.
Thank you very much and have a nice weekend,
Sarah
Hello well ,
I know this is an old forum post, but just wanted to add to what ISH was saying.
The answer still stands, 6890 is not compatible with the 7650 ALS. The GC models it is compatible with are (at the time of this comment at least):
- 8890…
Hi,
I passed this query on to a colleague who was involved with developing these columns, this was their response:
"It might be worth checking if they are filtering their mobile-phase and samples as it's possible the guard may be fouled. They could…
Welcome to the Dissolution Wiki.
Please find the most useful Dissolution resources from Agilent in the list below.
Dissolution catalog
Dissolution webinars
Complementary Dissolution 1-on-1 self-paced training
Contact Agilent dissolution expert…
Thank you for contacting us. Please note that analyzing the raw data file that ends in .xad is more informative than the screenshot shared. However, based on the screenshot shared, the ladder appears to have run as expected, therefore indicating a potential…
This Information Applies To: Agilent GC Systems
Issue
Peak fronting is present in a chromatography peak when it has an excessive asymmetry with a leading edge. A normal peak is almost symmetrical.
Other chromatographic problems are identified...
This Information Applies To: Agilent GC Systems
Issue
A shift in retention time can occur for single, multiple or all peaks.
Other chromatographic problems are identified in Basic Troubleshooting for GC Systems . Regular maintenance of your instrument...
This Information Applies To: Agilent GC Systems
Issue
A change in peak size can occur for single, multiple or all peaks.
Other chromatographic problems are identified in Basic Troubleshooting for GC Systems . Regular maintenance of your instrument...
This Information Applies To: Agilent GC Systems
Issue
Peak splitting is when a single compound is shown in the chromatogram as two peaks usually unresolved, or one of the peaks is a shoulder.
Other chromatographic problems are identified in Basic...
This Information Applies To: Agilent GC Systems
Issue
This test isolates the point of contamination to the sample introduction system, which includes the gas supply, gas supply lines, and the sample inlet. It does not include the syringe or autosampler...
This Information Applies To: Agilent GC systems
Issue
Peak tailing is present in a chromatography peak when it has an excessive asymmetry with a trailing edge. A normal peak is almost symmetrical.
Other chromatographic problems are identified...
T his Information Applies To: Agilent 8890/8860/7890/7820/6850/6890 GC Systems with TCD (Thermal Conductivity Detector)
Issue
Problems observed with thermal conductivity detector (TCD) results can have different underlying causes.
Resolution...
This Information Applies To: All GCs, 6890, 6850, 7890, 7820, 8890/8860, Intuvo 9000
Issue:
This article is a troubleshooting guide for when the Flame Ionization Detector (FID) does not ignite or the flame keeps going out.
Cause:
If the FID...
This Information Applies To: Agilent GC Systems with Flame Ionization Detector (FID)
Issue:
The Flame Ionization Detector (FID) jet could become clogged with ferrule material, column bleed, or heavy molecular analytes. The clogged jet will affect...
This Information Applies To: Agilent GC Systems with Split/Splitless (S/SL) inlet
Issue
Different liners are required for different high concentration, split analysis techniques including:
General use liners
Auto inject, general use
Auto...