Hi j esus5802
You can try in Previous Results tap /Highlight the spectrum for changing sample name/
Go to view/ then click Data Handling/ enter new sample ID name in the field sample id name/
click on back/ and go to re-Analyze
Select a method…
Hi rahmicetinkaya
We do not have a user manual for a cary 630 FTRI gas cell module,. I have attached some explanations about the use of the gas cell. Hope it helps you
Thanks
Regards
Hi Ardalan.P
Did you change the computer or the computer name?
You can copy license file from "C:\ProgramData\Varian\Cary License.lic" into WinUV folder "C:\Program Files (x86)agilent\Cary WinUV\",
if you change the computer you should find the…
This video guides you through the process of replacing the Electron Multiplier Horn for the Ultivo (G6465A, G6465B), iQ (G6160A).
This video is intended to support the written instructions found in the online help or in your Instruments User Guide.…
This video guides you through the process of replacing the oil and filter for the MS120 pump and applies to G6495 models with an MS120 pump.
This video is intended to support the written instructions found in the online help or in your instrument's…
This video guides you through the oil and filter change process for the MS40+ pump and applies to all LC/MS models equipped with an MS40+ pump.
This video is intended to support the written instructions found in the online help or in your instrument…
This video guides you through the process of removing or installing the nebulizer and applies to all LC/MS models.
This video is intended to support the written instructions found in the online help or in your instrument's user guide.
Parts required…
Hi Mau1909
We can perform this type of measurements with the Cary Eclipse. This is called EEM (Excitation-Emission-Matrix):
3D graph or contour plot are available. The 3D mode automatically collects a series of excitation, emission, or synchronous…
This Information Applies To: Agilent GC Systems
Issue
Excessive baseline noise can be introduced at different points including sample preparation, sample introduction, separation, and the detector. The excessive background can cause reduced signal...
This Information Applies To: Agilent GC Systems
Issue
Baseline instability that is not reproducible across multiple runs can be introduced at different points including sample introduction, separation, and the detector. The baseline instability...
This Information Applies To: Agilent GC Systems
Issue
Peak fronting is present in a chromatography peak when it has an excessive asymmetry with a leading edge. A normal peak is almost symmetrical.
Other chromatographic problems are identified...
This Information Applies To: Agilent GC Systems
Issue
A shift in retention time can occur for single, multiple or all peaks.
Other chromatographic problems are identified in Basic Troubleshooting for GC Systems . Regular maintenance of your instrument...
This Information Applies To: Agilent GC Systems
Issue
A change in peak size can occur for single, multiple or all peaks.
Other chromatographic problems are identified in Basic Troubleshooting for GC Systems . Regular maintenance of your instrument...
This Information Applies To: Agilent GC Systems
Issue
Peak splitting is when a single compound is shown in the chromatogram as two peaks usually unresolved, or one of the peaks is a shoulder.
Other chromatographic problems are identified in Basic...
This Information Applies To: Agilent GC Systems
Issue
This test isolates the point of contamination to the sample introduction system, which includes the gas supply, gas supply lines, and the sample inlet. It does not include the syringe or autosampler...
This Information Applies To: Agilent GC systems
Issue
Peak tailing is present in a chromatography peak when it has an excessive asymmetry with a trailing edge. A normal peak is almost symmetrical.
Other chromatographic problems are identified...
T his Information Applies To: Agilent 8890/8860/7890/7820/6850/6890 GC Systems with TCD (Thermal Conductivity Detector)
Issue
Problems observed with thermal conductivity detector (TCD) results can have different underlying causes.
Resolution...
This Information Applies To: All GCs, 6890, 6850, 7890, 7820, 8890/8860, Intuvo 9000
Issue:
This article is a troubleshooting guide for when the Flame Ionization Detector (FID) does not ignite or the flame keeps going out.
Cause:
If the FID...