Hello bofzgi84 ,
As an update to this, a colleague of mine has pointed out that for LC data the Compound ion count threshold settings are not present. I took the above screenshot with no data file loaded, so all possible options were enabled. I can…
Was the air/water check before you changed the septum and liner acceptable? 60% Oxygen...what is the Nitrogen percentage? 60% Oxygen would either be a gigantic leak and the Nitrogen percentage will be off the charts, or there is oxygen in the carrier…
Hi ,
I have try the method (Isocratic) on the different lines (A,B,C,D) and compare the results . It appear that there was a difference (shift in retention time about 2 mins) in the result were line (A) is used in the method . Thus the problem might…
Dissolution testing is labor intensive as well as a technique and time dependent analytical procedure. A typical dissolution workflow consists of several steps including dissolution media preparation, media filling, introducing the dosage form into the…
Hello all, What is the difference between the IntelliQuant / no IntelliQuant mode in SemiQuant (QuickScan) ? When I activate this option, the LOQ are modified.
In IntelliQuant mode, the LOQ is calculated according to TDS in sample ? Thanks in advance…
CBM said: As you state, the MessageBox.Show() act as if modeless - but the MessageBox.Show() is not modeless, I don't know the correct term, but something with Threads and Async... And in Visual Studio you likely have a common parent, that makes it act…
Here is a "best of" collection of links to manuals and tools for ICP-MS on Agilent.com.
ICP-MS Hardware Troubleshooting & Maintenance Resources
Technical Overview
Agilent ICP-MS Resource Library
Troubleshooting Tool for ICP-MS Sensitivity…
This Information Applies To: Agilent G4208A Instant Pilot
Issue
This article describes how to switch the illumination of the autosampler on or off (if available) using the G4208A Instant Pilot.
Items Required
G4208A Instant Pilot for Agilent...
This Information Applies To: Agilent 7683B Automatic Liquid Sampler
Issue:
O nly use this alignment procedure if the injector hardware configuration has changed or if the Align Mode light comes on.
Agilent does not recommend performing this procedure...
This Information Applies To: Agilent MassHunter data acquisition software and MassHunter Quantitative Data Analysis Software
Issue
This article explains the difference between quantifier and qualifier ions and provides some general guidance on quantifier...
This Information Applies To: 5200/5300/5400 Fragment Analyzer, Fragment Analyzer controller software
Issue:
Over time the dynamic coating polymer on the capillaries needs to be refreshed. Failure to do so can lead to a loss of performance. Indicators...
This Information Applies To: Agilent ICP-MS (7700/7800/7850/7900/8800/8900)
Issue
Elevated doubly charged values that are greater than 3% for x-lens configuration or greater than 7% for s-lens configuration, can be caused by contamination, or an...
This Information Applies To: Agilent 6200 Series TOF and 6500 Series Q-TOF Systems
Issue
Instructions on how to correctly dilute the tune mix for 6200 Series TOF and 6500 Series Q-TOF systems depending on source type.
Background
If the Tune...
This Information Applies To: Agilent MassHunter Qualitative Analysis Software version 10.0
Issue
The Agilent MassHunter Qualitative software can generate qualitative analysis reports, which may include sample chromatogram information and sample...
This Information Applies To: Agilent MassHunter Qualitative Analysis Software version 10.0 or higher
Issue
Identifying compounds using a spectral library is essential in qualitative analysis. This article will describe how to load a data file and...
This Information Applies To: Agilent ICP-MS Systems
Issue
The Helium cell gas line on the ICP-MS may be contaminated with air and moisture in case of a tank replacement, or if the instrument was not used for an extended amount of time. Purging the...
This Information Applies To: Agilent MassHunter Quantitative Analysis Software
Issue
The Calibration Curve window tools help with setting an appropriate calibration curve for each compound in the calibration table.
The Calibration Curve window...