This Information Applies To: Agilent OpenLab ChemStation software
Issue
The pump can be set to a low rate after completing a sequence using a shutdown method in the sequence. However, to avoid solvent overconsumption and lamp wear-out, the OpenLab...
This Information Applies To: Agilent OpenLab CDS 2.x controlling Agilent LC Systems
Issue
This article outlines an instruction on how to submit a shutdown method on OpenLab CDS 2.3 or above.
Background
Submit a shutdown run to the run queue...
This Information Applies To: Agilent OpenLab C DS software (Rev. 2x)
Issue
If the column configuration has been defined in the method, the instrument will calculate the pressure to maintain the target column flow rate. The column configuration must...
This Information Applies To: Agilent OpenLab CDS
Issue
When trying to launch the OpenLab Control Panel, the error "connection to server failed". The issue could happen when users created in the OpenLab Control Panel and these users are coming from...
This Information Applies To: Agilent OpenLab CDS
Issue
Procedure to define E-Signature levels in your OpenLab CDS.
Background
E-Signatures allow the users of Agilent OpenLab CDS to define a review/approval process for a Result Set. One look...