This Information Applies To: Agilent OpenLab ChemStation software
The pump can be set to a low rate after completing a sequence using a shutdown method in the sequence. However, to avoid solvent overconsumption and lamp wear-out, the OpenLab ChemStation software can be programmed to shut down the pump and the lamp at the end of the sequence.
Steps to Follow
Tips: For more information on submitting runs, see the following video in the Agilent YouTube channel: OpenLab CDS for ChemStation users - Submitting and managing runs
Learn how to effectively operate your Agilent OpenLab CDS ChemStation software:
HPLC-OL-1180rV2 - Agilent OpenLab CDS ChemStation – Sequences (C.01.09 and C.01.10) e-learning course available from Agilent University