I tried to copy EIC Signal description items near each other and I don't know how to avoid this problem showed below.
As you can see, the three chromatogram is the same compound. How can I avoid this repetition?
thank you for your help.
I tried to copy EIC Signal description items near each other and I don't know how to avoid this problem showed below.
As you can see, the three chromatogram is the same compound. How can I avoid this repetition?
thank you for your help.
Hello,
Try the MS Chromatogram Flowlayout object instead of the individual chromatograms.
Marty
Hi Martin. I have the same problem. I don't know how to manage the group repeating so we can have different compound name on chromatogram lighted in gray.
Hello,
One other question, it looks like you are using 10 as the multiplier for all the compounds in your table. Why not just place 10 in one of the sample multipliers 1-5 for all the injections and set the compound multipliers back to 1. Typically, the compound multiplier is used when you need to apply a different factor to each compound for something like standard purity. In your version, you can get the sample multiplier as I detailed previously.
Marty
you're right. I will use the multiplier 1 to avoid this 2.6 version problem. Very good idea.
It works perfectly. thank you again for your help.
The only problem I have, it is when I print the method process, we can still see the multiplier at one. I don't know how to take the multiplier in the injection list and incorporated into the method process.
I still it can be good to go in 2.7 to fix this.
Hi Martin, do you know how to replace my Avg, SD and RSD order. I want to have Avg first and RSD at the end?
I didn't found how to do that.
thank you
JF Fortin
It has to do with the order that you add them to the table. Last I tried, adding them in the order I want them did the trick. I recommend removing RSD and SD, pressing OK (so it registers as a change), then adding SD and RSD back in (in that order).
It has to do with the order that you add them to the table. Last I tried, adding them in the order I want them did the trick. I recommend removing RSD and SD, pressing OK (so it registers as a change), then adding SD and RSD back in (in that order).
Have you try it? It seems that I don't have the privilege to do so.
I'm not sure what you mean. Are you unable to edit the report?
Yes I can edit report buy I can't do any changes with those statistical results. So that's why I asked you if you have try to change the order.
No, you don't need to change the folder or anything like that. Just select the column in the table on the report template, right click, click on "Column properties", go to the aggregates tab, then follow my instructions above. If you're still struggling, I can provide some snapshots in a few minutes.
Oh I see. It works now. Thank you.