Hi community
Last week we faced problem on open lab,the problem we cannot launch the openlab
we used GC6890 ,openlab CDS C.01.06
See attached images
Regards
Dheya
Hi community
Last week we faced problem on open lab,the problem we cannot launch the openlab
we used GC6890 ,openlab CDS C.01.06
See attached images
Regards
Dheya
Hi all
many thanks gabcaron and ryoboyle for reply
The problem was we cannot open PDF report after the analysis completed and when we try to open data analysis
We got just black PDF page and to solve this problem we restore the PC then we cannot launch instrument .
Now after create and configure a new instrument in the OpenLab Control Panel the new instrument can launch and now OK but the PDF problem not solved and we should print the report to see the analysis results.
If PDF reports are not printing to the screen, then my first guess would be that something is wrong with the PDF XChange installation. It is possible to reinstall PDF XChange from the OpenLab ChemStation installation media. For more information you can refer to post linked below:
If PDF reports are not printing to the screen, then my first guess would be that something is wrong with the PDF XChange installation. It is possible to reinstall PDF XChange from the OpenLab ChemStation installation media. For more information you can refer to post linked below: