Hi everyone one,
I'm trying to set up automatic quantification and reporting of samples after acquisition, but I'm encountering some issues.
Here it's what i do:
I added column Keyword, DA method File, DA Method path and DA Report Method
i fill them with the same value for all my sample in my sequence, Keywork is empty
At the end of my sequence, I add a line with the keyword "Do Batch Quant". The above-mentioned columns have the same value as all the other samples.
I run my sequence, everything is fine, my datas are acquired, but at the end i don't have any report or batch create with my samples.
In the logbook i found this error:
DoBatchQuant: ' '
Executing post-sequence Quant Batch action: C:\Users\........
Error in MHBridge Index -1 is out of bounds
Have you any ideas of what i'm doing wrong ?
Software information:
MassHunterWorkstation GC/MS Data acquisition 10.2.489
MassHunter Workstation Software Quantitative analysis B.08.00
In the acquisition Method data acquisition and anaylsis are enable both
Thanks for helping !
