Quantitation method step in Textile Samples by LC/MS/MS.

Hi Team,

I'm sure agilent team must be really busy, and I don't want to seem interrupting.

Hope you can find a few minutes on this. Appreciate your time

Thanks

Hi shahzad,

I apologize for the delayed response. I am attaching a document that gives a basic example of setting up compound groups, which was introduced in Quant B.07.01, and using compound math to make an aggregate compound.

There is also a video available as part of the quant supplemental information called Compound Math – Aggregate peaks that goes over this topic.

If you have more specific questions about how to set up your analysis I would suggest reaching out to your local technical support team. They should be able to help in finding a local resource that can assist you further.

Hi Howard,

Thanks for your reply,

Now its working, and the major issue with me, how to assign Mass and RT, so now its clear we need to assign a bogus mass and retention time.

Thanks,

Khurram

Hi Howard,

Thanks for your reply,

Now its working, and the major issue with me, how to assign Mass and RT, so now its clear we need to assign a bogus mass and retention time.

Thanks,

Khurram