How to obtain multplier in masshunter quant batch table from the data of openlab cds fid using gc translator

Question

Hi we are now using masshunter quant to process the data of gc/fid obtain by openlab cds and then using gc translator.the multiplier has already been set in the sequence table.and is there a way to obtain it from the masshunter in the batch table.so the data can be postprocess.

howard_sanford · Answer

Hello prinklyb , 
 As far as I've been able to find out, only the data is translated. Even if information from the inject list were available, the Multiplier in MassHunter is calculated from the Dilution, Sample Amount, and Total Sample Amount and cannot be entered directly. Details on how that works can be found in this discussion. 
 (+) Masshunter quantification in post processing - Forum - Mass Spectrometry Software - Agilent Community 
 If you have the information available in an Excel spreadsheet you can copy and paste columns into the quant batch table. I believe that would be the easiest way to bring the information over.