Original Compound Peak and Original Qualifier Peak

Question

I see options for Original Compound Peak and Original Qualifier Peak under graphics in Report Builder 10.2.1. 
 I am unable to use them. Can anyone tell me what these are and if anyone has got them to work?

howard_sanford · Accepted Answer

Hello JWalker , 
 From the Software Status Bulletin https://www.agilent.com/cs/library/support/Patches/SSBs/mhquant.html this was a known issue in Quant 10.2, KPR#:393287. This has been fixed in Version 11.0 and higher. These versions are available for all instrument/analysis types except for GC/MS customers utilizing either UMAT or ECM compliance modes. GC/MS users that use compliance features will need to remain on Version 10.2 for the time being. 
 The workaround for viewing the original integration in Report Builder 10.2.x templates would be to enable the drawing of the original baseline. This can be done in either the report template or in the reporting method. This will draw an overlay of the original integration baseline on the peak. 
 For questions about software upgrades, please contact your local Agilent Sales and Support center .

Original Compound Peak and Original Qualifier Peak

Top Replies