Yesterday my LCMS system experienced the same error four times. The error sequence begins with the following:
MSQQQRC_1: Enter error/fault state: Turbo Fan locked (Not Supported)
Subsequently, my binary pump, multisampler, and column chamber all enter error states and shut down (EE 63, 0). After a minute or so the QQQ error clears, but the other modules remain in an error state. I can clear the error on the LC by power cycling the modules, but I am still very concerned why this is "error" is occurring at all.
Any insight on this issue would be appreciated. Thank you!
G7120A Binary Pump
G7116B Column Chamber