• State Not Answered
  • Replies 2 replies
  • Subscribers 86 subscribers
  • Views 737 views
  • Users 0 members are here
Options
Related

Agilent Knowledge Portal

Find maintenance, best practice, and troubleshooting articles.

Agilent Knowledge Portal

i want to know OpenLab Chemstation could control G6125C or not, The MSD was G6125C but not B

wuming

my LCMS software was CDS2, but it was too difficult to operate for our syn. colleagues. 

they hoped CDS2 could be changed to chemstation.  so could it be realized from tech. view.

MSD type was G6125C not B

Parents
  • 0

    Hi  

    It is not possible to use the G6125C MSD with Chemstation, unfortunately.  There is the possibility of using Masshunter WalkUp software to make it easier for your synthesis colleagues to run samples on this system.

    Maybe some OpenLab training would help your colleagues?  If they already use Chemstation, then learning how to translate what they are used to doing with Chemstation to work in OpenLab wouldn't take too long.

    /Andy

Reply
  • 0

    Hi  

    It is not possible to use the G6125C MSD with Chemstation, unfortunately.  There is the possibility of using Masshunter WalkUp software to make it easier for your synthesis colleagues to run samples on this system.

    Maybe some OpenLab training would help your colleagues?  If they already use Chemstation, then learning how to translate what they are used to doing with Chemstation to work in OpenLab wouldn't take too long.

    /Andy

Children
Was this helpful?
Privacy Statement
Terms of Use
Contact Us
Site Help