How to shut off the nebulizing gas when removing the nebulizer?
Find maintenance, best practice, and troubleshooting articles.
How to shut off the nebulizing gas when removing the nebulizer?
Nicole- Close the source, turn the MS on, and set the nebulizer pressure to 0 using the Method Editor in MH Acquisition.
Nicole- Close the source, turn the MS on, and set the nebulizer pressure to 0 using the Method Editor in MH Acquisition.
Thanks for your prompt response. I still hear the hissing sound from the gas line changing the nebulizer pressure to zero. I assume I will put the MS on standby mode so that I can take the nebulizer out.
Contacted Agilent, the best way to solve this problem is to have the nebulizer gas line cap.