Calibration workflow MassHunter version B08.02

Hi Anatoly,

Have you looked for the videos that are present with the quantitative analysis software. I think that they are on the installation disk but you may have to use windows explorer to navigate to them. There is lots of good information there  

Kevin. 

Thanks, Kevin!  I also received the following response from wonderful Agilent support, in case anyone else needs this resources:

This guide should work for general familiarization for B.07.x and B.08.x.

 http://www.agilent.com/en-us/training-events/eseminars/236e

Thanks, Kevin!  I also received the following response from wonderful Agilent support, in case anyone else needs this resources:

This guide should work for general familiarization for B.07.x and B.08.x.

 http://www.agilent.com/en-us/training-events/eseminars/236e