Hi!
We are using Agilent (Varian) 210/218 Solvent Delivery System for prep HPLC.
There has been a leak from its Mixer (narrowbore mixer according to the manual) and I think the seal or seal retainer have to been replaced.
I was looking up the manual to find out the parts, indicated in red below with a picture but then get confused, which leads me to confirm the correct part numbers with the community.
I think the upper part would be R0-025400-06 (Seal, stainless steel 10 mm (0.6 and 1.2)) and the bottom would be R0-070005-07 (Mixing seal retainer with Titanium frit 10 μm)?
Please correct me if these are not corresponding to what I meant to purchase.
Thank you!
Best,
Joonseok
