Hello, as i see in specification G7165A has two analog output, is it mean if in method i will set 2 different wavelength signal will send to different analog signal? Where signal 1 = wavelength 1 and signal 2 = wavelength 2?
i see an analog cable and here is bnc on one side and +and - on other side
As Julie said, there is only 1 output and you will need to make a selection below is using it.
The 0.1V is intended for chart recorders (don't think anyone uses those anymore) and the 1V is for Analog to Digital interface, hence why the Specs stated 2 OUTPUTS.
As Julie said, there is only 1 output and you will need to make a selection below is using it.
The 0.1V is intended for chart recorders (don't think anyone uses those anymore) and the 1V is for Analog to Digital interface, hence why the Specs stated 2 OUTPUTS.
