• State Suggested Answer
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 94 subscribers
  • Views 646 views
  • Users 0 members are here
Related

Agilent Knowledge Portal

Find maintenance, best practice, and troubleshooting articles.

Agilent Knowledge Portal

Collection of (I hope) simple questions for setting up Agilent HPLC for open access

mark.hutchins

Dear All

I have been used in previous employment to an Agilent LCMS with Walk-Up wherein users can simply put in a sample, select their name and method and samples are run.

I'm trying to prepare something similar in OpenLab, but have a small number of what might be obvious and trivial questions that I hope you'd all be kind enough to review and give me some advice?

1) Can you make it default for a sequence to be saved before running?

2) How can you view the data in DA for a single sample in a sequence that is complete, when the sequence is still running?  I always get errors stating data not available etc.

3) Is it best when managing multiple samples from multiple users to have samples submitted as sequences or single samples?

4) is there a 'default' report template someone can share with me - simply with the chromatograms, integration table, sample info etc.

thank you all for your time

Mark

Parents
  • 0

    Hi  

    How about using the same Masshunter Walkup software with OpenLab CDS?  

    Your other questions:

    1) Can you make it default for a sequence to be saved before running?

    A sequence will be saved before running, if you haven't already saved it.

    2) How can you view the data in DA for a single sample in a sequence that is complete, when the sequence is still running?  I always get errors stating data not available etc.

    From the Sequence window in OpenLab Acquisition, choose Review completed injections.

    3) Is it best when managing multiple samples from multiple users to have samples submitted as sequences or single samples?

    You could use either.  It is possible to create new sequences even when OpenLab is running a sequence.  The advantage of queuing separate sequences is that each sequence will end up with its own results in a separate result set, maybe making it easier for users to find their own data.

    4) is there a 'default' report template someone can share with me - simply with the chromatograms, integration table, sample info etc.

    In OpenLab Data Analysis, Data Selection, you can import the default report templates to your project(s).

    /Andy

Reply
  • 0

    Hi  

    How about using the same Masshunter Walkup software with OpenLab CDS?  

    Your other questions:

    1) Can you make it default for a sequence to be saved before running?

    A sequence will be saved before running, if you haven't already saved it.

    2) How can you view the data in DA for a single sample in a sequence that is complete, when the sequence is still running?  I always get errors stating data not available etc.

    From the Sequence window in OpenLab Acquisition, choose Review completed injections.

    3) Is it best when managing multiple samples from multiple users to have samples submitted as sequences or single samples?

    You could use either.  It is possible to create new sequences even when OpenLab is running a sequence.  The advantage of queuing separate sequences is that each sequence will end up with its own results in a separate result set, maybe making it easier for users to find their own data.

    4) is there a 'default' report template someone can share with me - simply with the chromatograms, integration table, sample info etc.

    In OpenLab Data Analysis, Data Selection, you can import the default report templates to your project(s).

    /Andy

Children
No Data
Was this helpful?
Privacy Statement
Terms of Use
Contact Us
Site Help