6890 GC-FID: How do I install the correct printer driver for MSD Chemstation?

Question

Printing Issue! The issue I'm having is that when I generate a report to the printer, the format is weird and everything prints out unaligned. If I generate the report to screen and print from that, the quant report comes out normal. This seems to be a printer driver issue, how do I go about getting the correct driver? 
 Specs: 
 -Instrument: 6890N GC-FID 
 -Software: MSD Chemstation E.02.01.1177 
 -Computer: hp computer with windows 10 pro 
 -Printer: Brother HL-L2370DW 
 Thanks!

wcody · Accepted Answer

For ongoing support reasons you may want to upgrade your software, the GCMS MSD Chemstation was obsoleted in 2013 with version E.02.02 being the last. A pretty good run of 20+ years for a software platform. It was replaced in 2013 by GCMS MassHunter B.07 and 8 years later it is now GCMS MassHunter acquisition 10.0. 
 You may want to speak with your local Agilent sales representative about either GCMS MassHunter 10.0 or using OpenLab CDS 2.5. Both are modern chromatography platforms and are fully supported on the latest Windows 10 pro 64-bit software.

6890 GC-FID: How do I install the correct printer driver for MSD Chemstation?

Top Replies