Update software for GC 6890N

Question

Hello everyone, i have a GC 6890N and need to updated the software ChemStation. 
 
 I have a HP 7694 Headspace Sampler and i can't use this in my GC. 
 
 Apparently the problem lies in the software, but i don't know how to update. 
 
 Can you help me. 
 
 My actual software is the ChemStation B.04.03

james_jenkins · Accepted Answer

Hi jvelasco, That version of software did not have headspace control if I recall correctly. The headspace had a standalone package that could be added and it ran in its own separate session. It basically emulated the keyboard and helped with some sequencing. The software is no longer available due to its age. The headspace can run from the keypad and the remote cable will step it through a sequence . I hope this helps. Regards James

hebgent · Answer

Hi jvelasco,

James is correct. The headspace control software was separate (G2923AA). I'm currentently running an HP 7694 HS using the control software A.01.03 on Chemstation B.04.03. The software is pretty old.

Tim

Update software for GC 6890N

Top Replies