When Air gap is 0.2 and the flow rate is 2.1 ml/min then the peak area found 287 by FID but when the air gap is 0 and flow rate is 1.47 ml/min then the area reduced to 141. Where analysis performed by Autosampler.
Find maintenance, best practice, and troubleshooting articles.
When Air gap is 0.2 and the flow rate is 2.1 ml/min then the peak area found 287 by FID but when the air gap is 0 and flow rate is 1.47 ml/min then the area reduced to 141. Where analysis performed by Autosampler.
I will mark this as assumed answered due to its age, feel free to update us with what you found or post again if this is still an issue.
Regards
James
I will mark this as assumed answered due to its age, feel free to update us with what you found or post again if this is still an issue.
Regards
James