My FID flame lights for 2 min and the hydrogen and air flows fluctuates afterwards leading to quenching of the flame. Any ideas please ?
Find maintenance, best practice, and troubleshooting articles.
My FID flame lights for 2 min and the hydrogen and air flows fluctuates afterwards leading to quenching of the flame. Any ideas please ?
Use a flow meter to test that the expected flows are being delivered. Also, be sure that you have traps on your gases to make sure that no moisture is getting into the gas streams for the FID.
Use a flow meter to test that the expected flows are being delivered. Also, be sure that you have traps on your gases to make sure that no moisture is getting into the gas streams for the FID.