Hi community
, I have problem with FID signal after ignition
The signal out put value still for a bout one hour
On a bout 500 pf then drop to about 60 pf
Your help
Find maintenance, best practice, and troubleshooting articles.
Hi community
, I have problem with FID signal after ignition
The signal out put value still for a bout one hour
On a bout 500 pf then drop to about 60 pf
Your help
Hi dheyaaldeen ,
I would say its usable signal on the TCD, but a little high. I like to see 30 or below.You could try and raise the TCD temp higher for a couple of hours. General advice since I dont know your method specifics.
Regards
James