Please give more information. TSU - is that Thermal Screening Unit? You say under varying pressures...from zero to how many PSI/Bar? Will you need to use a vacuum to get the sample? Will this be analytes in air or something else? Decomposition of what…
Did the EM get replaced March 15? Or a source cleaning? The EMV went down 883V.
The Ent Lens (Entrance Lens) those jumps from 16 to 63,32,47.5 .. and the Ion Focus going from 80's to 40's... make me jumpy. Something was changing. When were source cleanings…
The ID testing process in the pharmaceutical industry often exposes warehouse staff to hazardous materials. This new technical note shows how pharmaceutical manufacturing QA/QC organizations can use the Agilent Vaya Raman system to check raw materials…
Hello community,
I have the following error (attached images) when start either offline or online mode. As you can see, the module control panel also dissappear. I have checked all the conections between PC and all modules and the error window continue…
Recommendations updated after looking at this version from February 16, 2023. The recommendations are pretty much the same as above.
Increase the oven temperature equilibration time to 1.0 to 1.5 minutes or longer. It takes time for the 240° oven post…
We attempted the same testing on another OL2 instrument and the sensitivity issue was not present. It was unique to a single system. Agilent was very helpful getting us another system to test on. It seemed to be related to the tune/threshold/filtering…
Hi,
1. This is the "Easy Fit Lense Assy" - Since two years, we (Agilent) has decided not to clean the lenses, but to replace them completely. So if you want to disassemble these, you have to break the plastic cap, and use a screw set from an older regular…
Hello,
You would need to look into the other logs to see the issue in more detail. The details logs are in a Microsoft log format and required a viewer download. I would suggest opening a ticket with your local Agilent support group. It does look…
Hello,
I cannot give you a direct link for the software. You would need to use the Agilent subscribenet to download any software where you have an entitlement. This would be any software you have registered with the site for licensing in the past…
This Information Applies To: Agilent 8890/8860 GC Systems
Issue
Early Maintenance Feedback is a useful feature on Agilent GC Systems and software that allows a user to monitor the maintenance needed on their GC. This feature allows for users to...
This Information Applies To: Agilent 8890/8860 GC Systems
Issue:
This procedure outlines the steps to view and clear the maintenance warnings on based on Agilent 8890/8860 GCs. You can also follow the onscreen instructions to perform maintenance...
This Information Applies To: Agilent 6000 Series LC/MS systems equipped with Agilent MS-40+ rotary vane pump.
Issue
Regular check of the rough pump fluid level in your MS40+ pump as part of regular 6000 LC/MS system maintenance checks.
Steps...
This Information Applies To the Following Products : All Agilent iFunnel and Agilent Jet Stream (AJS) 6400 Series LC/MS triple quadrupole systems, Agilent 6460A/C, 6470A, 6490A, and 6495A/B/C
Issue:
As LC Triple Quadrupole Mass Spectrometers (LC...