Has anyone had any issues installing Openlab CDS 2.2 on Windows 10 1903 Enterprise with .net 4.8? I can't seem to get the Shared Service module to install, it keeps failing with the error "Upgrading from V1 to V1.1 step has failed"
Other info are import succesfully except the two ones. I tired " Amt.","Tot. Amt. " in the importing csv file. Failed. "User1","User2" failed too. " Sample Amount","Total Sample Amount" also failed. Could you please kindly help me again? It is very important…
The 6850 & 6890 LAN adapters are very often configured to respond to a "BOOTP" server program running on the network they are wired to.
So upon powerdown the GC loses its previously assigned IP address, and later upon powerup the GC sends a request…
When I want to save or export a worksheet, does the software give me the option where to save it? When you save a worksheet, it always saves to the database. It will appear on the home page within Mercury. When you “export” either the data as .csv (via…
Hello, everyone! I see a similar thread with masshunter , but not chemstation. Do I need a macro to do the job with retention indices? Are such macros available for download? I'd like to identify some VOC by indices in an n-alkanes scale in a hardware…
I am not able to connect to the instrument using Lab Advisor because the instrument is connected to OpenLab. We should be able to disconnect using "Close Connection" from the OpenLab Control Panel, but it gives the following error when I try:
Agilent…
We recently reactivated an old G1946D with ESI-source which had low signal intensity before shutdown. After Cleaning everything, the signal intensities while autotuning with ESI-mix where better, but while trying to tune vcap it fails at 1700-2000V with…
We have three Sulfur SCDs, two of which have inordinately high signal outputs:
1) Agilent 355; Model #G6644A; SN #CN11411006; PMT #DC7303; with FID on HP 5890 Series B
2) Sievers 355; Model SCD355; SN #0500-918; PMT #WB5942; with FID on HP 5890 Series…
Thanks for your help!
Here is the method:
/cfs-file/__key/communityserver-discussions-components-files/147/0878.acqmeth.txt
This is the scan chromatogram focusing on MMA in the SIM region. I performed another injection of 0.8 uL MMA to help identify…
Hello,
We are currently running an Agilent 6460 QQQ LC/MS.
After a seemingly successful run we went to go analyze the data and found that all of our peaks had shifted considerably. We concluded that this might be due to the replacement of our inline…
This Information Applies To: Agilent GC Systems
Issue
Excessive baseline noise can be introduced at different points including sample preparation, sample introduction, separation, and the detector. The excessive background can cause reduced signal...
This Information Applies To: Agilent GC Systems
Issue
Baseline instability that is not reproducible across multiple runs can be introduced at different points including sample introduction, separation, and the detector. The baseline instability...
This Information Applies To: Agilent GC Systems
Issue
Peak fronting is present in a chromatography peak when it has an excessive asymmetry with a leading edge. A normal peak is almost symmetrical.
Other chromatographic problems are identified...
This Information Applies To: Agilent GC Systems
Issue
A shift in retention time can occur for single, multiple or all peaks.
Other chromatographic problems are identified in Basic Troubleshooting for GC Systems . Regular maintenance of your instrument...
This Information Applies To: Agilent GC Systems
Issue
A change in peak size can occur for single, multiple or all peaks.
Other chromatographic problems are identified in Basic Troubleshooting for GC Systems . Regular maintenance of your instrument...
This Information Applies To: Agilent GC Systems
Issue
Peak splitting is when a single compound is shown in the chromatogram as two peaks usually unresolved, or one of the peaks is a shoulder.
Other chromatographic problems are identified in Basic...
This Information Applies To: Agilent GC Systems
Issue
This test isolates the point of contamination to the sample introduction system, which includes the gas supply, gas supply lines, and the sample inlet. It does not include the syringe or autosampler...
This Information Applies To: Agilent GC systems
Issue
Peak tailing is present in a chromatography peak when it has an excessive asymmetry with a trailing edge. A normal peak is almost symmetrical.
Other chromatographic problems are identified...
T his Information Applies To: Agilent 8890/8860/7890/7820/6850/6890 GC Systems with TCD (Thermal Conductivity Detector)
Issue
Problems observed with thermal conductivity detector (TCD) results can have different underlying causes.
Resolution...
This Information Applies To: All GCs, 6890, 6850, 7890, 7820, 8890/8860, Intuvo 9000
Issue:
This article is a troubleshooting guide for when the Flame Ionization Detector (FID) does not ignite or the flame keeps going out.
Cause:
If the FID...