A new educational page from Agilent’s Liquid Chromatography experts is now available. The brand-new HPLC Fundamentals page is curated specifically for scientists wanting to know more about HPLC technology. It also provides answers for HPLC related frequently…
Hi Raina,
on Carbon columns H 2 will be the first peak closely followed by methane. Like on all PLOT columns overloaded peak shift to smaller retention times, i. e. into your hydrogen signal. There is nothing you can do with this type of column. Hydrogen…
Hello Elei , This is just the normal system pressure as measured by the pressure sensor inside the pump. You can check this from the online or acquisition section of your SW, under the pump status. What SW are you currently using?
Hi MSVS , My pleasure to assist. Thank you for letting us know that you were able to configure successfully using the steps. I am glad to hear that we now have the solution to this case.
The Digest of upcoming webinars has been updated as of May 29.
Notable additions include:
GC & GCMS (1)
OMICS (1)
Check Out:
EPA 200.8 Water ICP-MS Analyzer – Learn How This Integrated Package Ensures Your Lab is Up and Running Samples…
Soap and water or Snoop type leak detection fluids are not recommended to be used on GC or GC/MS gas connections. If gas is leaking out, gas is also leaking in - that's why a leak in the helium line will show as air in the background. That means that…
Here is a "best of" collection of links to user manuals and resources for OpenLab CDS on Agilent.com.
For OpenLab ChemStation, see Collection of OpenLab ChemStation Resources .
For OpenLab EZChrom, see Collection of OpenLab EZChrom Resources . …
Hello Adamcfc101 Please advise if the intermittent error "metering device command failed, draw command aborted" is still occurring on your dual needle multisampler. As Carlos has asked, please also share the following details:
- is this error happening…
This Information Applies To: Agilent GC Systems
Issue
Excessive baseline noise can be introduced at different points including sample preparation, sample introduction, separation, and the detector. The excessive background can cause reduced signal...
This Information Applies To: Agilent GC Systems
Issue
Baseline instability that is not reproducible across multiple runs can be introduced at different points including sample introduction, separation, and the detector. The baseline instability...
This Information Applies To: Agilent GC Systems
Issue
Peak fronting is present in a chromatography peak when it has an excessive asymmetry with a leading edge. A normal peak is almost symmetrical.
Other chromatographic problems are identified...
This Information Applies To: Agilent GC Systems
Issue
A shift in retention time can occur for single, multiple or all peaks.
Other chromatographic problems are identified in Basic Troubleshooting for GC Systems . Regular maintenance of your instrument...
This Information Applies To: Agilent GC Systems
Issue
A change in peak size can occur for single, multiple or all peaks.
Other chromatographic problems are identified in Basic Troubleshooting for GC Systems . Regular maintenance of your instrument...
This Information Applies To: Agilent GC Systems
Issue
Peak splitting is when a single compound is shown in the chromatogram as two peaks usually unresolved, or one of the peaks is a shoulder.
Other chromatographic problems are identified in Basic...
This Information Applies To: Agilent GC Systems
Issue
This test isolates the point of contamination to the sample introduction system, which includes the gas supply, gas supply lines, and the sample inlet. It does not include the syringe or autosampler...
This Information Applies To: Agilent GC systems
Issue
Peak tailing is present in a chromatography peak when it has an excessive asymmetry with a trailing edge. A normal peak is almost symmetrical.
Other chromatographic problems are identified...
T his Information Applies To: Agilent 8890/8860/7890/7820/6850/6890 GC Systems with TCD (Thermal Conductivity Detector)
Issue
Problems observed with thermal conductivity detector (TCD) results can have different underlying causes.
Resolution...
This Information Applies To: All GCs, 6890, 6850, 7890, 7820, 8890/8860, Intuvo 9000
Issue:
This article is a troubleshooting guide for when the Flame Ionization Detector (FID) does not ignite or the flame keeps going out.
Cause:
If the FID...