Are you interested in GPC/SEC technology and want to deepen your knowledge? Then the following two classroom training courses at our Agilent University are just right for you.
Note: The course is in German, with English slides. The course will be held…
HPLC 2024 will be held from July 20-25 , 2024 in Denver , Colorado this year. We will host our Reach Your Summit Reception which will be held on July 23 rd from 6pm – 8pm local time at Earl’s Kitchen + Bar. At this event, you will find different areas…
Hello Ruthvn Please share some photos of your chromatograms and check for void volumes in capillary connections. Once the issue occurs, does it keep occurring for subsequent injections or do the resolution and acceptable peak shape come back in later…
Hello LCMSvsLCUV Would you be able to share more details about what you are trying to achieve please, including the instrument set up, application, analyte of interest and the column part number?
We are having a issue clearing up these valleys/dips after our peaks of interest. So far we have confirmed no leaks up to the column (pressure and leak test passed), new column, new guard column, new mobile phases, new standards, and several purges through…
Hello,
I will assume you mean you are using the backup restore tool for CDS 2.4 not the ECM XT import scheduler. If you have setup an import scheduler task to back the ECM-XT system up that would be self-referential and would not actually back anything…
Hello,
Although limited Chemstation does save some confg files and other information at the OS user level, so creating a new OS user would clear those files. Also, some printer configurations can cause problems with Chemstation as it tries to read…
This Information Applies To: 5200/5300/5400 Fragment Analyzer, Fragment Analyzer controller software
Issue:
Over time the dynamic coating polymer on the capillaries needs to be refreshed. Failure to do so can lead to a loss of performance. Indicators...
This Information Applies To: Agilent ICP-MS (7700/7800/7850/7900/8800/8900)
Issue
Elevated doubly charged values that are greater than 3% for x-lens configuration or greater than 7% for s-lens configuration, can be caused by contamination, or an...
This Information Applies To: Agilent 6200 Series TOF and 6500 Series Q-TOF Systems
Issue
Instructions on how to correctly dilute the tune mix for 6200 Series TOF and 6500 Series Q-TOF systems depending on source type.
Background
If the Tune...
This Information Applies To: Agilent MassHunter Qualitative Analysis Software version 10.0
Issue
The Agilent MassHunter Qualitative software can generate qualitative analysis reports, which may include sample chromatogram information and sample...
This Information Applies To: Agilent MassHunter Qualitative Analysis Software version 10.0 or higher
Issue
Identifying compounds using a spectral library is essential in qualitative analysis. This article will describe how to load a data file and...
This Information Applies To: Agilent ICP-MS Systems
Issue
The Helium cell gas line on the ICP-MS may be contaminated with air and moisture in case of a tank replacement, or if the instrument was not used for an extended amount of time. Purging the...
This Information Applies To: Agilent MassHunter Quantitative Analysis Software
Issue
The Calibration Curve window tools help with setting an appropriate calibration curve for each compound in the calibration table.
The Calibration Curve window...
This Information Applies To: Agilent MassHunter Quantitative Analysis "Quant-My-Way" user interface (version B.09.00 or later)
Issue
To process the data files in the batch and obtain quantitative results, you must either create a new quantitative...
This Information Applies To: Agilent MassHunter Qualitative and Quantitative Analysis
Issue
Calculation of signal-to-noise in MassHunter is done using the same routine for both Qualitative and Quantitative Analysis. However, there are differences...
This Information Applies To: Agilent GC/MS MassHunter Data Acquisition Software
Issue
Multiple samples can be run without user intervention using an Automated Liquid Sampler (ALS) in combination with a Sequence.
Users can perform simple edits...