Ok, I've tried to condition the column three times and no improvement. I also have clipped some of the inlet end of the column and reinstalled and that did not help either. I have not checked inlet as I have not worked on them before and I don't have…
Hello! My multisampler (G7167B: DEBAR00250) has the following error: compressor has error EE 30756,0. According to the manual, this indicates a possible hardware error. I ran a sample cooler function test, which failed, and the result comment is: target…
Dear colleagues
We have Agilent LCMSD 1260 Infenity /6130Quaderpole. we encountered this error: Install module C:\Chem32\CORE\HPSCIL00.DLL, failed
We want to know the cause and the solution for this error ?
Thanks in advance.
With my best regards…
We are running long term tests with multiple GC analysis, automatically controlled from LabVIEW via ActiveX communication with OpenLab EZChrom. We recently had an event in the EZChrom software creating problems; suddenly midway through the tests, the…
Hi Paul, thank you for your reply. I can't attach a full autotune report due to it failing mid run. I can however add the text file it generated.
Fullscreen
Autotune_20230419_130648.txt
Download
----------------------------------…
Good afternoon all. I have a baffling issue with our 6470 LCMS. It passes checktune. I can run autotune is positive mode or in negative mode, but not both together as previously. I get an error message at the end of the autotune process stating "Failed…
Tray sensor failed is either try a new tray or the transport assy is most likely needs to be replaced. Does Lab Advisor see the module? There is a log book in Lab Advisor as well.
Hello, i'm a Milan university student in thesis in an analytical lab.
I'm currently trying to develop an analytical method to isolate and analyze Niaprazine in G C-FID , by using as internal standard Phenacetin . But as i know we, in this laboratory…
Hello,
upon start vacuum sequence. You should hear a clik. This is for BK. Monitor IF/BK meter at that point. it has to go lower than 20 Pa. Then you should hear a second click. This time another valve open. It should rise above 20 Pa. Then after…
Hi Kris, thank you! I tried to upload the screenshot of the version info, but I failed. So I have to type all of them out since I'm not sure which one is useful. Hope it can help!
Agilent OpenLAB Intelligent Reporting A.01.11.138
Agilent OpenLAB CDS…