A-Plus 2.0.2 not working, no pump found

Hi all,

I cannot connect to an MS40+ with A-Plus 2.0.2, while T-Plus works fine. My laptop runs with Win 10, using a USB-RS232 cable with a proper driver (I hope). I tried Chrome and Edge with the same result - the pump search is runninng for few minutes and no pump is found. I also modified the security settings to "allow" all. At the end I see the screen with different baud rates to choose. I use 9600 as for T-Plus, but still no pump found. I also tried to reinstall A-Plus, but nothing changed. Any idea? Many thanks.

Parents
  • To use A-PLUS you must connect your Agilent product to a PC with a USB port using a Moxa adapter.
    Moxa is adapter/converter requiring specific drivers to be installed on your PC.
    It's important to download and install the drivers for your Moxa adapter to allow the correct communication between your PC and Agilent device.

    Please refer to the documentation provided with your MOXA adapter for drivers installation.

  • Hello,

    many thanks for the answer. Just to clarify a bit more, do I need a specific Moxa adapter as I found more options are available. Is model UPort 1110 suitable?

    Thank you.

    Kind regards,

    Alex

Reply Children
Was this helpful?