Hi all,
I have problem in GC6890 ,I can not connect with open lab and a message appears licensing error
any help.
Thanks
Dheya
Hi all,
I have problem in GC6890 ,I can not connect with open lab and a message appears licensing error
any help.
Thanks
Dheya
Hi
You mean I should connect GC and PC with crossover cable to check RJ45 port
? Is crossover cable same CAT6 or different
? How can I recognize crossver cable
Many thanks
Dheya
Hello,
A direct connection from the GC to the workstation with a crossover cable is the most stable connection you can setup.
Here is a description of a crossover cable: Ethernet crossover cable - Wikipedia
Most crossover cables will have the word "Crossover" printed on them or be labeled as such. Other than that, you can also look at the wiring at the RJ45 connectors and compare to the pinout in the Wikipedia article.
Hello,
A direct connection from the GC to the workstation with a crossover cable is the most stable connection you can setup.
Here is a description of a crossover cable: Ethernet crossover cable - Wikipedia
Most crossover cables will have the word "Crossover" printed on them or be labeled as such. Other than that, you can also look at the wiring at the RJ45 connectors and compare to the pinout in the Wikipedia article.