I tried to copy EIC Signal description items near each other and I don't know how to avoid this problem showed below.
As you can see, the three chromatogram is the same compound. How can I avoid this repetition?
thank you for your help.
I tried to copy EIC Signal description items near each other and I don't know how to avoid this problem showed below.
As you can see, the three chromatogram is the same compound. How can I avoid this repetition?
thank you for your help.
I will still need to show a mulitplier that will be needed to change my amount in ug in concentration expressed as PPM (ug/g).
no?
I am not using any dilution factor for now. Only one mulitplier for this calculation who is doing well with the % mass since the formula is the same for all compound.
Hello,
One other question, it looks like you are using 10 as the multiplier for all the compounds in your table. Why not just place 10 in one of the sample multipliers 1-5 for all the injections and set the compound multipliers back to 1. Typically, the compound multiplier is used when you need to apply a different factor to each compound for something like standard purity. In your version, you can get the sample multiplier as I detailed previously.
Marty
you're right. I will use the multiplier 1 to avoid this 2.6 version problem. Very good idea.
It works perfectly. thank you again for your help.
The only problem I have, it is when I print the method process, we can still see the multiplier at one. I don't know how to take the multiplier in the injection list and incorporated into the method process.
I still it can be good to go in 2.7 to fix this.
Hi Martin, do you know how to replace my Avg, SD and RSD order. I want to have Avg first and RSD at the end?
I didn't found how to do that.
thank you
JF Fortin