• State Verified Answer
  • Replies 5 replies
  • Subscribers 116 subscribers
  • Views 957 views
  • Users 0 members are here
Related

Agilent Knowledge Portal

Find maintenance, best practice, and troubleshooting articles.

Agilent Knowledge Portal

Displaying chromatograms with no intergrated peaks

HWu

I am using OpenLab Ver 2.3

I am trying to create a report template for GC-MS but I notice the report template is not displaying chromatograms of injection with no integrated peaks. I have try setting the group repeat as Injection_ID, Injection_DataFileName but to no avail.

These chromatograms are only missing if I have the sequence selected. If I select the individual injection, the report template does display the chromatogram. It only skips them in the group repeat if I select the whole sequence.

Parents
  • 0

    Hello,

    I am not sure why this would happen as the chromatogram object should display all chromatograms unless filtered in some manner. Is it possible the chromatogram object is in a group that has a filter affecting the chromatogram display? Another option would be you have scaling set tied to peak values that do not exist when there are no integrated peaks. 

    Marty Adams 

  • 0 in reply to martin.adams

    Edit:

    I have discovered the problem, it is an ordering issue. All the chromatorgrams with no intergrated peaks are in the end.

    I have tried a few sorting options such as Injection_ID and Injection_LastModifiedDate but the reporting still put all of the chromatogrames with no intergrated peaks in the end instead of following the sorting rule in the group.

Reply Children
No Data
Was this helpful?
Privacy Statement
Terms of Use
Contact Us
Site Help