At some point I believe OpenLab CDS software, Rev. C.01.08 [210], was corrupted for one GC. We run two Agilent 7890B's on the software. There are two issues for GC-4, file path "\chem station\1\". The other GC \2\ is running perfectly. No issues at all.
1) The offline session will close at the "initializing Config Reg. Color Table" point when loading. I've tried restarting the pc and software. I've shut down the GC and software and rebooted but still not opening. No error message or code is displayed. I can't find the Config Reg file to change to old so a new Config Reg can generated. (assuming this is what to do to fix the problem)
2) At some point easy sequence also stopped working. When you click on "save and add to Que" this message pops "Sequence validation Failed". The sequence table will work but isn't optimal for the lab.
These are 2 different problems on the same GC so let me know if I need to split up the questions.
Any help would be appreciated!
