OpenLab Help and Learning

Hi revathy,

The question was what happens when you click on the 'Home' option (outlined in red below) in the top left, not Control Panel:

Sorry I should be more specific.  I know what you mean, that it should take me to the original parent page home, where control panel and control panel overview comes from. But for some reason If I press this home button in the control panel(as you highlighted in the above image), I am in this(below) control panel overview screen again.  So i tried pressing the Control Panel that took me to the above screen which I pasted before.  Again Home in that, got below screen.

Usefull Links for GC

GC Troubleshooting Video Series | Agilent

Collection of OpenLab CDS Resources

https://community.agilent.com/docs/DOC-1853-collection-of-gc-resources-on-agilentcom#jive_content_id_GC_Hardware_Trouble…

GC and GC/MS Webinar Series

OpenLAB CDS Webinar Series

I think this one suits your needs I tried it last Tuesday, its good.

Install OpenLAB Help and Learning Only

Insert the USB media, right-click the setup.exe file, and run it as

On the start screen, select OpenLAB CDS, and click OK.

Use this option to install OpenLAB Help and Learning content without

installing OpenLAB CDS applications.

Do not use this option on a machine where OpenLAB CDS is, or will be,

installed.

In the OpenLAB CDS Installer, click Documentation.

Click Install OpenLAB Help and Learning Only.

Select your language, and click Next.

On the welcome screen, click Next.

Confirm Agilent terms and conditions, and click Next.

Review the installation directory. If desired, click Change... to specify a

Click Install.

When the installation is complete, click Finish.

If you plan to use Internet Explorer to view the content, set the Internet

“Configure Internet Explorer for OpenLAB

on page 30 .

Allow blocked content when

“Uninstall OpenLAB Help and Learning Only” on page 95).

Thank you Mr White.  I will and let you know.  Thanks for the support.

Revathy