MassHunter B.09.00 problems with display binary pump pressure curve

Question

Dear forum, 
 I got a problem in my MassHunter Data Acquisition application: 
 I would like to track the pressure history of the Binary Pump. I can select the Binary Pump Pressure under Adjust in the Chromatogram Plot window, but I cannot follow the values on the plot. Attached is a screenshot of the problem. 
 
 Thank you for your help!

howard_sanford · Accepted Answer

Hello Koegrou , 
 This issue can occur for a couple of different reasons. The easiest solution to try first is to start a no injection run. This will synchronize the real time display and get any instrument signals to align with MS signals. Once the instrument trace is being plotted you can abort the run. Typically after this the plots will stay synchronized.

MassHunter B.09.00 problems with display binary pump pressure curve

Top Replies