Some customers have problems downloading the .exe file from the Red Cargo website (https://redcargo.azurewebsites.net). This driver enables them to connect their G6691A Flow Meter to a PC. Attached is the driver saved as a .txt file. Customers should be able to copy the file to their PC and then change the file back to the .exe extension to install the Red Cargo driver.
Hello, I need a consultation. After loading the Red Cargo drivers, the flowmeter was connected to the PC and was in the "Available for run" state.
I clicked on the “Upgrade” button after this operation “Download files from server”, “Transfer files to device”, “Upgrade firmware” and “Reboot device” were successful.
The meter display went out during reboot. After that, the flowmeter did not turn on. And now also does not turn on. Please help in this situation.
Hello, I need a consultation. After loading the Red Cargo drivers, the flowmeter was connected to the PC and was in the "Available for run" state.
I clicked on the “Upgrade” button after this operation “Download files from server”, “Transfer files to device”, “Upgrade firmware” and “Reboot device” were successful.
The meter display went out during reboot. After that, the flowmeter did not turn on. And now also does not turn on. Please help in this situation.
