Chromatography Software Portal

Chromatography Software Portal Article Search

Filter by:

Signing and Locking Result Sets in OpenLab CDS

This Information Applies to: Agilent OpenLab CDS Issue Locking results sets upon signing, and its effect on the E-sign process. Background: Check the articles on: How enforced signatures affect the E-sign process What happens if you...
Calculating Area% and Height% in OpenLab Software

This Information Applies To: Agilent OpenLab CDS , Agilent OpenLab ChemStation Issue Calculation of Area percent or Height percent for uncalibrated compounds in OpenLab software. If all components respond equally in the detector, then Area% and...
Quantitation Calculations in OpenLab CDS

This Information Applies To: Agilent OpenLab CDS Issue This article outlines different ways to quantify the amount of compound in an unknown sample. Background Quantitation uses peak area or height to determine the amount of a compound in...
How to Use Integration Optimizer in OpenLab CDS 2.5 and Above

This Information Applies To: Agilent OpenLab CSD 2.5 and above Issue The integration optimizer helps find a suitable set of integration events. It allows integration parameters to be tuned via sliders (peak width, slope sensitivity, height reject...
Creating a Sequence in OpenLab ChemStation

This Information Applies to: Agilent OpenLab ChemStation Issue Setting up a sequence to run a series of injections. Requirements Have a method created. Have an instrument ready or idle. If not, the sequence will turn on the instrument...