Is it possible to include samples with zero amounts in the sample statistics in the report?

Question

martin.adams · Accepted Answer

Hello, 
 
 As Cole said you need to be selecting the correct sample types in you sequence to use this. If you are doing that, the filter would be Sample_Type <> 1 to remove the calibration standards or Sample_Type = 3 for just samples if you have other sample types to filter out. See the enumeration table for sample type below from the CDS help. Some items in the table are for EZChrom, but 1,3,4,5,7,9,15 are used in CDS 2.x as possible sample types.

Is it possible to include samples with zero amounts in the sample statistics in the report?

Top Replies