I have one query if anyone can help me. I have Agilent 1290 Infinity with modules G7120A, G7129B, G7116B, G7114B, G7115A. I am facing the issue while working with Empower 3 FR5 of Instrument Driver Agilent ICF 3.2. My DAD detector is connected via LAN with LAC/e and other modules are connected to DAD. Issue is that in run sample the Binary Pump goes to default mode (Flow 0 ml/min, solvent 100 etc.) not using the Instrument method value. Its works for some injections but some for not. I have tried everything but still the issue is same. Please help me if anyone has any solution on this.