ELSD HPLC FIRMWARE

What is the minimum firmware needed for HPLC modules to run an ELSD? I have the ELSD driver installed but no luck. Does anyone know this information? Thanks

0 Wolney Vasconcelos 8 months ago

What is the product number of your ELSD? G4260B, G4261B and G7102A are the most common ones but we also have G4260A and G4261A.

Also, what software are you using? If you are running Openlab 2.X then you will also need to update ELSD firmware to be able to connect it
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 Bwsanchez 8 months ago

Hello,

I believe we have resolved this issue

Thanks!

General Business
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 HPLC_Tech 7 months ago in reply to Wolney Vasconcelos

Wolney, I have a customer that upgraded OpenLab and need to upgrade the G1702A firmware. I did not see a download for the ELSD. Is the firmware on the CDS install disk?
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 Wolney Vasconcelos 7 months ago in reply to HPLC_Tech

It’s not very easy to upgrade firmware on an ELSD. I don’t remember G7102A firmware update procedure from memory, but for the G4260B with Openlab 2.5 or later you have to replace the mainboard.

Usually, you only have to install an add-on on lab advisor and follow instructions to update it on the newer ones, like G7102A.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 HPLC_Tech 6 months ago in reply to Wolney Vasconcelos

thank you!
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel

Was this helpful?