This Information Applies To: OpenLab CDS (version 2.x)
Issue:
This article describes for how to create a new result set by combining multiple result sets with OpenLab CDS (version 2.x). Creating result sets can be useful in the following scenarios:
Combining single samples, sequences, or a...
This Information Applies To: OpenLab CDS (version 2.x)
Issue:
The default setting places a triangular peak marker on the top of all integrated peaks in the chromatogram section of the intelligent report. The peak marker is removed by following this procedure.
Steps to follow:
Start OpenLab...
This Information Applies To: OpenLab CDS (ver. 2.x) Systems
Issue:
The master method contains default settings and is used as the template for developing laboratory-specific methods. Any changes made to the master method are recorded in an audit trail that can be accessed and printed. Each method...
This Information Applies To: OpenLab CDS (version 2.x) Systems
Issue:
This article explains how to open, check, and output Audit Trails from Data Analysis of OpenLab CDS (version 2.x). Available Audit Trails include Result Set, Injections in Result Set, Sequence, and Processing Method linked with...
This Information Applies To: OpenLab CDS ChemStation (version C.01.xx), OpenLab CDS EZChrom (version A.04.xx), OpenLab CDS (version 2.x), OpenLab ECM XT
Issue:
An Agilent Support Engineer may request system internal log files when troubleshooting Agilent OpenLab Workstation, Client, or Instrument...