This Information Applies To: OpenLab CDS, OpenLab ChemStation, MassHunter
Overview:
This article describes how to print out a document with all the information about the hardware in your system. This information will include the serial numbers, firmware revisions, driver versions, names, and part numbers of the modules in your system.
Steps to follow:
The Module List containing system information can be found clicking the information icon on the Instrument Status Dashboard.
The icon is a small i at the bottom right of the Dashboard shown by the blue arrow in Figure 1.
Figure 1. Instrument Status Dashboard. The information icon i is shown by the blue arrow.
Clicking i, will open the Module List, containing all the required information as shown in Figure 2.
On the bottom right of the window, it will be possible to click Print to generate a file.
 |
Learn how to effectively operate your instrument with Agilent OpenLab CDS:
Agilent 1260 Infinity LC Systems with OpenLab CDS (ver. 2.3, 2.4 and 2.5) e-learning path available from Agilent education
|
