This Information Applies To: OpenLab CDS (version 2.x) Systems
Issue:
This article explains tips for how to review and confirm audit trails of Result Set / Injection Data / Processing Method by Administrators at Data Analysis of OpenLab CDS (version 2.x).
Tips: Reviewing the audit trails requires the role privilege Review Audit Trail. The Administrative User can set the role privilege from the OpenLab Control Panel. If this privilege is not predefined, the Review button cannot be seen.
|
To open the Data Analysis Audit Trail window see:
Steps to follow:
These steps are applicable to opening the Audit Trail for Result Set, Injections, Sequence, Processing Method (Master Methods).
In the Home tab, select the desired audit trail and load the required acquisition method. To open the Audit Trail window, select General > Properties > Show Audit Trail.
The pink colored lines in the audit trail are entries that the operator has not reviewed.
To see audit trail in sequential time display, select the Details icon
Scroll to the bottom of the list and the Review button will be available. Click Review and complete the review.
The PDF Export and Print buttons are not available to be selected because audit trials are a part of results or method. The results or the method must be saved before being able to print or export as PDF.
Close the audit trail window.
Save the review:
To Save Method, Select Save Method button and select Save Method from drop-down menu.
To Save Processing Method linked with Result Set, select Save All Results button will also save Processing Method same time.
To Save Result Set / Injections / Sequence, select Save All Results button
The PDF Export and Print buttons become available. To output the audit trail, click PDF Export or Print.
Learn how to effectively operate your Agilent OpenLab CDS version 2.x:
Agilent 1260 Infinity LC System with OpenLab CDS (version 2.3, 2.4 and 2.5) e-learning path from Agilent Education |